List of compatible inverters for the complete battery
Below is a list of compatible inverters for the HS-48-280-200 complete battery.
Our complete battery works perfectly with standard inverters with a DC connection and a nominal voltage of 48V (or 51.2V). It is connected to the inverter in the usual way, using positive and negative terminals.
The battery was intentionally designed as a low-voltage storage device to eliminate the risk of electric shock to people and (domestic) animals. Therefore, it is not compatible with high-voltage inverters. However, due to its 48V (or 51.2V) DC voltage, it is suitable for a wide range of inverters and manufacturers.
The data bus adapters (Victron or SMA) mentioned in the following table can be found in our shop:
Victron: Link to the data bus adapter
SMA: Link to the data bus adapter
Growatt: no data bus adapter required, only a standard network cable.
Deye: no data bus adapter required, just a standard network cable.
The product enables a simple data connection between the inverter and battery without any additional installation effort. The battery is then directly recognized by the inverter system and transmits the battery parameters to it.
If the data bus adapter is not mentioned under "Notes" for inverters, it is not required. In this case, the battery can communicate directly with the inverter (no adapter necessary).
| Manufacturer/Type | DC input voltage | compatibility | note |
| Victron Multiplus 1 | 48V/51.2V | Yes | Data communication possible with Data bus adapter |
| Victron Multiplus 2 | 48V/51.2V | Yes | Data communication possible with Data bus adapter |
| Victron Quattro | 48V/51.2V | Yes | Data communication possible with Data bus adapter |
| (In principle, almost all Victron inverters are suitable) | 48/51.2V | - | Data communication possible with Data bus adapter |
| Deye e.g.: | 48V/51.2V | Yes | No data bus adapter is required, just a standard network cable. |
| SMA e.g. | 48V/51.2V | Yes | Data communication possible with Data bus adapter |
| SMA with DC high voltage (200-1000V) is not suitable | |||
| Growatt | 48V/51.2V | Yes | No data bus adapter is required, just a standard network cable. |
| Phocos | 48V/51.2V | Yes | No data bus adapter required |
| Lumentree | 48V/51.2V | Yes | No data communication No data bus adapter required |
| BYD | - | no | |
| Huawei | - | no | |
- If you make a selection, the page will be completely updated.
About Us
Shop for lithium batteries (Lifepo4)
Information
We can be reached by phone at the following times:
Our trusted partners
