List of compatible inverter for the complete battery

Below you will find a list of compatible inverters for the complete battery type HS-48-280-200.

Our complete battery works perfectly with commercially available inverters with a DC connection and a nominal voltage of 48V (or 51.2V). It is connected to the inverter in the classic way with plus and minus.

The battery was deliberately developed as a low-voltage storage device so that there is no risk of electric shock for people and (domestic) animals. It is therefore not compatible with high-voltage inverters. However, due to the 48V (or 51.2V) direct voltage, it is suitable for a wide range of inverters and manufacturers.

You can find the data bus adapter mentioned in the table below in our shop: Link to the data bus adapterThe product enables easy data connection without any additional installation effort. If this is not mentioned under "Note", it is not required. In this case, the battery can communicate directly with the inverter (no adapter necessary).

manufacturer/type

DC input voltage compatibility note




Victron Multiplus 1 48V/51.2V Yes data bus adapter recommended
Victron Multiplus 2 48V/51.2V Yes data bus adapter recommended
Victron Quattro 48V/51.2V Yes data bus adapter recommended
(basically almost all Victron inverters are suitable) - - data bus adapter recommended








Deye 48V/51.2V Yes no data bus adapter required




BYD - no




Huawei - no




SMA 48V/51.2V Yes pay attention to the input voltage range
SMA high voltage (200-1000V) no